FEATURES AND ADVANTAGES
Baslat-B7800 Fast acting, non-foaming, non-oxidizing biocide.
Baslat-B7800 Environmentally friendly because it is non-persistent and degrades to naturally occurring products.
Baslat-B7800 Provides efficient, cost-effective microbiological control at low use concentrations.
Baslat-B7800 Controls bacteria, fungi and algae in industrial non-potable membrane systems.
TYPICAL PROPERTIES
Appearance Colorless to Amber liquid
Odor Mild, antiseptic odor
pH (as is) @ 25°C 3-5
Solubility in water Complete
Specific Gravity ·1.10±0.05(g/cm³)
CHEMICAL FEEDING AND CONTROL
May be used to control bacteria and reduce biofouling in non-potable industrial membrane systems (reverse osmosis, ultra filtration, micro filtration) and peripheral equipment. Acceptable applications include dosing into RO systems for the production of boiler makeup water, rinsing of electric components, and industrial waste water treatment.
Should be added to the system inlet water or before any other contamination area ahead of the reverse osmosis unit. Add with a metering pump on an intermittent basis depending on the severity of contamination and the guidelines specified by the membrane manufacturer.
Baslat-B7800 may be fed continuously to the membrane system feed water at the rate of 10 to 100 ppm. Once treatment is completed, rinsing with feed water should continue until conductivity values in the permeate are at or below values before treatment. Badly fouled systems must be cleaned before treatment is begun. For offline system disinfection, add 50-170 ppm Baslat-B7800 to the off-line cleaning feed tank and re-circulate for 30 minutes to 3 hours. Frequency of addition should be every 5 days or as needed.
Note: for industrial systems in which Baslat-B7800 residuals cannot be tolerated, must be slug fed. During and for 30 minutes to 1 hour following chemical addition, permeate and concentrate streams must be diverted to waste.
SAFETY AND HANDING
May be toxic by ingestion. Contact with eyes causes severe irritation or burns and irreversible eye damage. The use of goggles or face shield and rubber gloves when handling this product is recommended. For more information, see the Safety Date Sheet provided with this product.
PACKAGING
Baslat-B7800 is packaged in 25 KG non-returnable plastic drums.
